What's Required?
Reviewed by David Torres, PE, Fire Protection Engineer NFPA 25 requires four tiers of sprinkler system maintenance: monthly visual inspections by building staff, quarterly testing by a licensed contractor, annual comprehensive inspections, and a five-year internal pipe examination. According to NFPA research, inadequate maintenance is a leading factor when sprinkler
What's Required?
Reviewed by David Torres, PE, Fire Protection Engineer The NFPA 704 hazard diamond is a four-section label that tells firefighters what a material will do before they enter a burning building: how easily it ignites (red), what it does to the body (blue), whether it will explode (yellow), and whether
What's Required?
Reviewed by David Torres, PE, Fire Protection Engineer NFPA 13 governs the design, installation, and commissioning of automatic sprinkler systems — water supply adequacy, sprinkler head type and spacing, pipe sizing, obstruction clearances, and backflow prevention. While NFPA 25 handles ongoing maintenance, NFPA 13 matters to building managers because any modification
What's Required?
Reviewed by David Torres, PE, Fire Protection Engineer NFPA 101, the Life Safety Code, governs how occupants exit a building during an emergency. It specifies exit routes, travel distances, door hardware, stairwell design, emergency lighting, and occupancy limits. Adopted in all 50 states and enforced by local fire marshals, NFPA
What Do I Need?
Reviewed by James Carter, CFPS (Certified Fire Protection Specialist) A commercial fire alarm system automatically detects fire, alerts occupants at 85+ decibels with synchronized strobes, and transmits a signal to a monitoring center for fire department dispatch — all within seconds of a detector activation. NFPA 72 governs every component: detection,
What's Required?
Reviewed by James Carter, CFPS (Certified Fire Protection Specialist) NFPA 10 governs the full lifecycle of portable fire extinguishers: monthly visual checks by building staff, annual professional inspections by certified technicians, 6-year internal maintenance for stored-pressure units, and 12-year hydrostatic testing for all rechargeable metal-shell extinguishers. Most violations stem from
What Do I Need?
Reviewed by James Carter, CFPS (Certified Fire Protection Specialist) Fire alarm pull stations are manual devices that let occupants trigger the building alarm when they spot fire before automatic detectors do. NFPA 72 requires pull stations on every exit route, mounted at 42 to 48 inches above the floor, with
What Do I Need?
Reviewed by James Carter, CFPS (Certified Fire Protection Specialist) NFPA 72 requires fire alarm notification at a minimum of 85 decibels in occupied spaces, using a distinctive pattern that occupants immediately associate with fire evacuation. Visual notification — synchronized strobe lights — is required by ADA and NFPA 72 for deaf and
What Do I Need?
Reviewed by James Carter, CFPS (Certified Fire Protection Specialist) Fire alarm monitoring connects your system to a central station staffed 24/7, ensuring automatic fire department dispatch when an alarm activates — no phone call from occupants required. Most commercial buildings are required by local fire code to have monitoring. Annual
What Do I Need?
Reviewed by Jason Kaminsky, CFPS (Certified Fire Protection Specialist) Commercial kitchens require both a fixed automatic hood suppression system and a portable Class K wet chemical extinguisher per NFPA 96 — no exceptions. Class K agents use saponification chemistry to cool super-heated cooking oil below ignition temperature, convert it to foam,
What Do I Need?
Reviewed by Jason Kaminsky, CFPS (Certified Fire Protection Specialist) Combination fire alarm and CO detection systems integrate both hazards into a single control panel, monitoring service, and maintenance contract. For new commercial construction, integrated systems cost $12,000 to $35,000 — less than separate fire and CO systems combined. Fire
What Do I Need?
Reviewed by Jason Kaminsky, CFPS (Certified Fire Protection Specialist) Electrical fires require a non-conductive suppression agent — any extinguisher with a Class C rating. Using water or conductive foam on an electrical fire creates electrocution risk for the operator. ABC multipurpose dry chemical ($40 to $100) is the standard choice for